Cabling Routes for Landed Houses
The diagrams below show examples of how cables can be run around and inside your
home and a close-up of the connection to StarHub's lead-in pipe.
Connection to StarHub's Lead-In Pipe
Note:
- A separate conduit pipe is to be provided for StarHub’s cable from the gatepost to the house. The pipe shall not have more than two bends between openings, and the radius of all bends shall be at least 20 times the radius of the conduit or pipe.
- Developer shall engage QP (Qualified Professional Engineer / Architect) to supervise and obtain all necessary approvals from the relevant authorities.
Material List
Below is a list of approved materials that should be used to get your house broadband-ready. Residents are advised to purchase these materials from StarHub (Materials Department) or call StarHub’s Cabling Hotline at 6873 2828 for a list of StarHub-approved contractors to purchase from.
| RG11 Cable | Commscope F11SSEF (flooded) Duo Bond E108998(UL) (min. order is one drum) |
| RG6 Cable | Belden 1530A, 90% Braiding Duo Bond |
| Conduit for RG11 | 50mm UPVC supplied by (customer’s own contractor) |
| TV Outlet | a) StarHub 1001A TV/FM Isolator (Face down) b) StarHub 1001B TV/FM Isolator (Face front) c) StarHub Logo Single Barrel Wall Plate |
| Splitter | 3 way (GRS3DGH); 4 way (GRS4DGH); Regal 8 way (GRS8DGV) |
| Indoor Booster (Optional) | Distribution AMP model AM-2FORWARD/15 (15dB) |
| Connector | Ultrasealed Gilbert RG 6 and RG 11 |
| Splitter Box | Watertight surface mounting moulded enclosure. Size: 380mm x 300mm x 120mm (supplied by developer or renovation contractor) |
Please contact StarHub's Cabling Hotline at 6873 2828 if you intend to renovate or rebuild your home to ensure all necessary provisions are made during construction.
