This website uses cookies to enable all functionalities for best performance during your visit. Should you wish to decline cookies to be sent to you, kindly adjust your browser settings accordingly. By continuing browsing this website, you are giving consent to the use of cookies on this website. See our Data Protection Policy for more details.
Back
What is Wireless Broadband?
How to Surf on Wireless Broadband
How to Set Up Your Wireless Broadband
How to Configure SSID/Network Name

How to configure SSID/network name

Linksys Wireless Network PC Card

(Disclaimer: These notes are provided as a guide. They are to be used only as advisory notes. While every care is taken, StarHub will not be responsible for any system corruption or failure arising from the installation or use of this software. Please use StarHub SSID "ACCESS-StarHub" in StarHub Wireless Broadband Hubs only.)

Linksys Wireless Network PC Card

To get started, please ensure that you have completed the Drivers and Software installation of the Linksys Wireless Network PC Card.

Launch the Linksys program as shown in figure below. Generally, this program can be launched from Programs menu that appears after you click the Windows Start button.

Select the Profiles tab and follow steps D to J.

On the Profiles screen, click the New button to create a new profile.

Name the profile as StarHub Wireless and click OK.

Under Choose a network type, select Infrastructure Mode.

Enter the SSID as ACCESS-StarHub. Click Next.
 

Under Network Setting, select Obtain an IP address automatically (DHCP), and click Next.

Under Security Settings, choose Disabled for WEP, and leave the rest of the fields blank.

 

Choose Yes to confirm the settings.

Choose Activate new setting now, and launch your Internet Browser to start surfing. 

Cisco Aironet 350

To get started, please ensure that you have completed the installation of the Drivers and Aironet Client Utility for the Cisco Aironet 350 card.

Launch the Aironet Client Utility as shown in figure below. Generally, this utility can be launched from Programs menu that appears after you click the Windows Start button.

Select the Profile Manager icon and follow steps D to J.

To create a new connection profile, click on the Add button.

Name the profile as 'StarHub Wireless' and click Apply.

Under System Parameters tab, key in 'ACCESS-StarHub' as the SSID and under Network Type select Infrastructure

Select the Network Security tab
Under Network Security Type select None
Under WEP select No WEP
Click OK to save the settings 

Under Use Selected Profile, select StarHub Wireless and click on OK button to complete the configuration.

From the Aironet Client Utility dialog box, click on the Status Icon to view your connection status.

You are now successfully linked to the wireless access point StarHubWireless Broadband Hub. Launch your Internet Browser to start surfing. 

Orinoco Silver / Gold Wireless Card

To get started, please ensure you have completed the installation of the Drivers and the Wireless Client Manager utility for the Orinoco card.

Launch the Wireless Client Manager utility as below. Generally, this utility can be launched from Programs menu that appears after you click the Windows Start button.

From the Actions drop down menu, click on Add/Edit Configuration Profile and follow steps d-k to create the StarHub Wireless profile

Click on the Add button

Enter the Profile Name as StarHub Wireless and select Access Point as the Network Type. Click Next to continue.

Enter 'ACCESS-StarHub' as the Network Name (i.e. SSID)

Click Next to continue
 

Leave Enable Data Security blank.

Click Next to continue.

Keep the default setting (i.e. Off) for Power Management

Click Next to continue
 

Enable the option to Renew IP Address when selecting this profile

Click Finish to complete the configuration

At your laptop taskbar, you will see the Orinoco Wireless Signal Indication bar. 

You are now successfully associated to the wireless access point StarHubWireless Broadband Hub. Launch your Internet Browser to start surfing.

Nokia D211 Wireless Card

To get started, please ensure you have completed the installation of the Drivers and the Wireless Client Manager utility for the Nokia.

Launch the Nokia D211 program as shown in figure below. Generally, this program can be launched from Programs menu that appears after you click the Windows Start button.

Click on New and follow steps D to J.

Click Next to continue.

Under Profile name, key in 'StarHub Wireless'.

Select WLAN connection.

Click Next to continue.

Select Infrastructure.

Under Network name (i.e. SSID), enter 'ACCESS-StarHub'.

Under TCP/IP Settings leave blank.

Click Finish to confirm settings. 

Select StarHub Wireless and click OK.

You are now successfully linked to the wireless access point StarHubWireless Broadband Hub. Launch your Internet Browser to start surfing.

Wireless Broadband/Hotspots Locations
Wireless Broadband Alliance Coverage